Simpson Capstan Rope Winch CS-CW Fits Chain Saws w 3/8" Chain

Simpson Capstan Rope WinchSimpson Capstan Rope Winch is available in two models, either powered by a lightweight gas engine or attaches to most chainsaws. It pulls up to 2,500 lbs. It's excellent for pulling big game animals, boats, and for winching stuck vehicles out of extreme locations.

You can pull loads long distances without overheating the motor or experiencing loss of pulling power. Rope is safer than cable if it breaks or snaps back.

The capstan type winch is unique, you're not limited to the length of cable that a drum will hold and the pulling power does not decrease as the drum fills as is the case with drum type winches. You can take up slack in the winch line or play out line, by hand, without running the winch.

Model CS attaches to your chain saw. Saw must be less than 3.5 cubic inch. Needs 3/8" pitch drive sprocket. 2500 lb. capacity depending on size of Chain Saw.

Model: CS-CW
Shipping Weight: 25lbs
Manufactured by: SIMPSON WINCH INC.